/home/critechuser/operational/bin -title -title "176_km_SSE_of_Ust’-Kamchatsk_Staryy_NP2" -dateEvent 16_Mar_2021_18:38 -Mag 6.6 -Lat 54.7018 -Lon 163.2077 -eqDepth 22.06 -i iDeck1.txt -o . -opt rel -code HYSEA -addparams -depthtype_topofthefault_-strike_340.1_-dip_81.49_-rake_164.77 Parsing addparams string: -depthtype_topofthefault_-strike_340.1_-dip_81.49_-rake_164.77 -depthtype=topofthefault -strike=340.1 -dip=81.49 -rake=164.77 searching faults Exiting from search fault Dist calculated from NOAA faults: 66.833397 km searching faults Exiting from search fault Dist calculated from MedEU faults: 13534.928711 km /home/critechuser/operational/bin -title -title "176 km SSE of Ust’-Kamchatsk Staryy NP2" -dateEvent 16 Mar 2021 18:38 -Mag 6.6 -Lat 54.7018 -Lon 163.2077 -eqDepth 22.06 -i iDeck1.txt -o . -opt rel -code HYSEA -addparams -depthtype_topofthefault_-strike_340.1_-dip_81.49_-rake_164.77 Parsing addparams string: -depthtype_topofthefault_-strike_340.1_-dip_81.49_-rake_164.77 -depthtype=topofthefault -strike=340.1 -dip=81.49 -rake=164.77 lonmin= 161.707703 lonmax=164.707703 cellSize=-1.000000 batmax=0.250000 ** End of creation ** /home/critechuser/operational/bin -i -i iDeck1.txt -o . -opt rel -code HYSEA Reading file: /home/critechuser/operational/bin/config.txt Line 1: **************** Line 2: *Output options Line 3: **************** Line 4: * Line 5: outTxt =false Line 6: * Line 7: outHTif_exec_SWAN =true Line 8: outHTif_exec_TILES=false Line 9: outHTif_post =false Line 10: * Line 11: outuvTif_exec_SWAN =true Line 12: outuvTif_exec_TILES=false Line 13: outuvTif_post =false Line 14: * Line 15: outBMP =false Line 16: outJPG =false Line 17: * Line 18: outGIF_exec_SWAN =true Line 19: outGIF_exec_TILES =false Line 20: outGIF_post_SWAN =false Line 21: outGIF_post_HYFLUX =true Line 22: outGIF_post_NAMIDANCE =true Line 23: outGIF_post_MOST =true Line 24: outGIF_post_CORR =false Line 25: outGIF_post_HYSEA =false Line 26: * Line 27: checkWatchPoints_exec_SWAN =true Line 28: checkWatchPoints_exec_TILES=true Line 29: checkWatchPoints_post_SWAN =false Line 30: checkWatchPoints_post_HYFLUX =true Line 31: checkWatchPoints_post_NAMIDANCE =true Line 32: checkWatchPoints_post_MOST =true Line 33: checkWatchPoints_post_CORR =true Line 34: checkWatchPoints_post_HYSEA=true Line 35: * Line 36: outkml_exec_SWAN =true Line 37: outkml_exec_TILES =false Line 38: outkml_post_SWAN =false Line 39: outkml_post_HYFLUX =true Line 40: outkml_post_NAMIDANCE =true Line 41: outkml_post_MOST =true Line 42: outkml_post_CORR =false Line 43: outkml_post_HYSEA =true Line 44: * Line 45: outGifAnimation_exec =false Line 46: outGifAnimation_post =true Line 47: outGifAnimation_post_CORR=false Line 48: * Line 49: intermediateAnimation =true Line 50: intermediateAnimation_CORR =false Line 51: * Line 52: tifH2netcdf_exec_SWAN =true Line 53: tifH2netcdf_exec_TILES=false Line 54: tifH2netcdf_post_SWAN =false Line 55: tifH2netcdf_post_HYFLUX=true Line 56: tifH2netcdf_post_NAMIDANCE=true Line 57: tifH2netcdf_post_CORR=false Line 58: * Line 59: tifuv2netcdf =false Line 60: * Line 61: writeWPtxtFiles_exec_SWAN=true Line 62: writeWPtxtFiles_exec_TILES=true Line 63: writeWPtxtFiles_post_SWAN=false Line 64: writeWPtxtFiles_post_HYFLUX=true Line 65: writeWPtxtFiles_post_NAMIDANCE=true Line 66: writeWPtxtFiles_post_MOST=true Line 67: writeWPtxtFiles_post_CORR=true Line 68: * Line 69: formatBat =GTiff Line 70: inFormat =GTiff Line 71: inFormat_NAMIDANCE =netcdf Line 72: inFormat_MOST =netcdf_NOAA Line 73: inFormat_HYSEA =netcdf_HYSEA Line 74: * Line 75: outFormat =GTiff Line 76: outFormat_CORR =netcdf Line 77: outFormat_NAMIDANCE =netcdf Line 78: outFormat_MOST =netcdf_NOAA Line 79: outFormat_HYSEA =netcdf_HYSEA Line 80: * Line 81: tarFilesAndDelete =true Line 82: deleteAnimFiles =true Line 83: deleteAnimFiles_NAMIDANCE=false Line 84: deleteAnimFiles_MOST=false Line 85: deleteAnimFiles_HYSEA=true Line 86: * Line 87: outTTT_TILES=false Line 88: * Line 89: * HYFLUX flags Line 90: mapfmt = PCRaster Line 91: mapext = .map Line 92: outfmt = GTiff Line 93: outext = .tif Line 94: radius=6378388. Line 95: houtmin = 1e-7 Line 96: voutmin = 1e-7 End of Reading file: /home/critechuser/operational/bin/config.txt /home/critechuser/operational/bin -i -i iDeck1.txt -o . -opt rel -code HYSEA **** Start of file : ./iDeck1.txt Line 1: ********************************************* Line 2: * Tsunami input deck: Line 3: ********************************************* Line 4: * General data Line 5: Title ="176 km SSE of Ust’-Kamchatsk Staryy NP2" Line 6: outPath =(null) Line 7: * Line 8: DateTsunami =16 Mar 2021 18:38 Line 9: * Line 10: * Calculation parameters * Line 11: InTime =0.000000 * initial time (h) Line 12: FinTime =1.750000 * end time (h) Line 13: Tsave =1.000000 * t save (min) Line 14: dtMax =0.250000 * deltat (s) Line 15: fanning =0.015 Line 16: * Line 17: * Fault parameters (nfaults=1) * Line 18: *------------------------------------------- Line 1Input file size is 43200, 21600 0...10...20...30...40...50...60...70...80...90...100 - done. 9: FaultNumber 1 Line 20: *------------------------------------------- Line 21: * EPICENTER * Line 22: Lat =54.701801 * degree Line 23: Lon =163.207703 * degree Line 24: Mag =6.600000 * Richter scale Line 25: faultform =8 * Okada parameters Line 26: flenght =31.000000 * km Line 27: fwidth =8.000000 * km Line 28: strike =340.100006 * degree (geog North=0) Line 29: slip =0.898000 * m Line 30: dip =81.489998 * degree Line 31: rake =164.770004 * degree Line 32: depth =22.059999 * km (top of the fault) Line 33: ------end of fault 1 ------------ Line 34: * Line 35: FaultMode =0 Line 36: * Line 37: * Code parameters * Line 38: code =HYSEA Line 39: * Line 40: * Grid parameters * Line 41: constbat =False * for back compatibility Line 42: automscale =False * for back compatibility Line 43: width = 3.000000 * degree Line 44: batgrid =0.250000 * min Line 45: * Line 46: * calculation window Line 47: lonmin =161.707703 Line 48: lonmax =164.707703 Line 49: latmin =53.201801 Line 50: latmax =56.201801 Line 51: bathymetry =GEBCO30 **** End of file : ./iDeck1.txt ---| batmode = 3 gdal_translate -srcwin 41003 4054 362 362 /home/critechuser/operational/DATA/gebco30.tif ./clipFile.tif *** Interpolating clipped bathymetry. Dataset ./clipFile.tif ncols=720, nrows=720 ix=10/720 ix=20/720 ix=30/720 ix=40/720 ix=50/720 ix=60/720 ix=70/720 ix=80/720 ix=90/720 ix=100/720 ix=110/720 ix=120/720 ix=130/720 ix=140/720 ix=150/720 ix=160/720 ix=170/720 ix=180/720 ix=190/720 ix=200/720 ix=210/720 ix=220/720 ix=230/720 ix=240/720 ix=250/720 ix=260/720 ix=270/720 ix=280/720 ix=290/720 ix=300/720 ix=310/720 ix=320/720 ix=330/720 ix=340/720 ix=350/720 ix=360/720 ix=370/720 ix=380/720 ix=390/720 ix=400/720 ix=410/720 ix=420/720 ix=430/720 ix=440/720 ix=450/720 ix=460/720 ix=470/720 ix=480/720 ix=490/720 ix=500/720 ix=510/720 ix=520/720 ix=530/720 ix=540/720 ix=550/720 ix=560/720 ix=570/720 ix=580/720 ix=590/720 ix=600/720 ix=610/720 ix=620/720 ix=630/720 ix=640/720 ix=650/720 ix=660/720 ix=670/720 ix=680/720 ix=690/720 ix=700/720 ix=710/720 ix=720/720 Fault number 1 Calling Okada with slip=0.898000 and depth=22.059999 ! calling gdal factor 1 Selecting place namesPlace names found in area: 2 Selecting place namesPlace names found in area: 2 Selecting measuring gauges /home/critechuser/operational/DATA/gauges.csv Gauges names found in area: -1 Selecting measuring gauges /home/critechuser/operational/DATA/gauges.csv Gauges names found in area: -1 Created HYSEA input deck as ./hysea.txt End of programmeOpening file hysea.bat Converting hysea_bin.bat Opening file hysea.ini Converting hysea_bin.ini [('-t', 'TS_location.txt'), ('-o', 'TS_location.dat')] empty line empty line file closed /************************************************************* Tsunami-HySEA numerical model Copyright (C) 2010-2017 EDANYA Research Group, University of Malaga (Spain). Tsunami-HySEA can not be copied, modified and/or distributed without the express permission of the EDANYA Research Group. Tsunami-HySEA is distributed under license. For more information, visit: https://edanya.uma.es/hysea/tsunami-hysea_license.html *************************************************************/ Problem data Initialization: from file CFL: 0.5 Water-bottom friction: 0.03 Maximum allowed velocity of water: 100 Epsilon h: 0.005 m Threshold for the 2s+WAF scheme: 20 m Stability coefficients Level 0: 0.2 Simulation time: 6300 sec Saving time of NetCDF files: 60 sec Saving time of time series: 1 sec Number of levels: 1 Level 0 Volumes: 720 x 720 = 518400 Longitude: [161.71, 164.705] Latitude: [53.2039, 56.199] Load balancing data Process 0: rows 0-719 Writing '"176_lb_01level_01proc.bin' Process 0 loading data /************************************************************* Tsunami-HySEA numerical model Copyright (C) 2010-2017 EDANYA Research Group, University of Malaga (Spain). Tsunami-HySEA can not be copied, modified and/or distributed without the express permission of the EDANYA Research Group. Tsunami-HySEA is distributed under license. For more information, visit: https://edanya.uma.es/hysea/tsunami-hysea_license.html *************************************************************/ Problem data Initialization: from file CFL: 0.5 Water-bottom friction: 0.03 Maximum allowed velocity of water: 100 Epsilon h: 0.005 m Threshold for the 2s+WAF scheme: 20 m Stability coefficients Level 0: 0.2 Simulation time: 6300 sec Saving time of NetCDF files: 60 sec Saving time of time series: 1 sec Number of levels: 1 Level 0 Volumes: 720 x 720 = 518400 Longitude: [161.71, 164.705] Latitude: [53.2039, 56.199] Reading time: 2.084362e-01 sec. ['-n', 'NETCDF.nc', '-t', 'TS_location.txt', '-m', 'locations', '-d', '16_Mar_2021_18:38', '-i', 'iDeck1.txt', '-r', '5', '-b', '20', '-e', 'Yes', '-x', '0.05'] NETCDF.nc gdal_translate -of GTiff NETCDF:"NETCDF.nc":max_height TIF_MAXHEIGHT_END.tif gdal_translate -of GTiff NETCDF:"NETCDF.nc":arrival_times TIF_Arrival_Time.tif gdal_translate -of GTiff NETCDF:"NETCDF.nc":arrival_times TIF_Maximum_Time.tif end extract Tif files opening dataset: NETCDF.nc ('argv=', ['-o', '.']) ('opts=', [('-o', '.')]) opening ./NETCDF.nc /home/critechuser/operational/bin -i -i iDeck1.txt -o . -opt rel -code SWAN Reading file: /home/critechuser/operational/bin/config.txt Line 1: **************** Line 2: *Output options Line 3: **************** Line 4: * Line 5: outTxt =false Line 6: * Line 7: outHTif_exec_SWAN =true Line 8: outHTif_exec_TILES=false Line 9: outHTif_post =false Line 10: * Line 11: outuvTif_exec_SWAN =true Line 12: outuvTif_exec_TILES=false Line 13: outuvTif_post =false Line 14: * Line 15: outBMP =false Line 16: outJPG =false Line 17: * Line 18: outGIF_exec_SWAN =true Line 19: outGIF_exec_TILES =false Line 20: outGIF_post_SWAN =false Line 21: outGIF_post_HYFLUX =true Line 22: outGIF_post_NAMIDANCE =true Line 23: outGIF_post_MOST =true Line 24: outGIF_post_CORR =false Line 25: outGIF_post_HYSEA =false Line 26: * Line 27: checkWatchPoints_exec_SWAN =true Line 28: checkWatchPoints_exec_TILES=true Line 29: checkWatchPoints_post_SWAN =false Line 30: checkWatchPoints_post_HYFLUX =true Line 31: checkWatchPoints_post_NAMIDANCE =true Line 32: checkWatchPoints_post_MOST =true Line 33: checkWatchPoints_post_CORR =true Line 34: checkWatchPoints_post_HYSEA=true Line 35: * Line 36: outkml_exec_SWAN =true Line 37: outkml_exec_TILES =false Line 38: outkml_post_SWAN =false Line 39: outkml_post_HYFLUX =true Line 40: outkml_post_NAMIDANCE =true Line 41: outkml_post_MOST =true Line 42: outkml_post_CORR =false Line 43: outkml_post_HYSEA =true Line 44: * Line 45: outGifAnimation_exec =false Line 46: outGifAnimation_post =true Line 47: outGifAnimation_post_CORR=false Line 48: * Line 49: intermediateAnimation =true Line 50: intermediateAnimation_CORR =false Line 51: * Line 52: tifH2netcdf_exec_SWAN =true Line 53: tifH2netcdf_exec_TILES=false Line 54: tifH2netcdf_post_SWAN =false Line 55: tifH2netcdf_post_HYFLUX=true Line 56: tifH2netcdf_post_NAMIDANCE=true Line 57: tifH2netcdf_post_CORR=false Line 58: * Line 59: tifuv2netcdf =false Line 60: * Line 61: writeWPtxtFiles_exec_SWAN=true Line 62: writeWPtxtFiles_exec_TILES=true Line 63: writeWPtxtFiles_post_SWAN=false Line 64: writeWPtxtFiles_post_HYFLUX=true Line 65: writeWPtxtFiles_post_NAMIDANCE=true Line 66: writeWPtxtFiles_post_MOST=true Line 67: writeWPtxtFiles_post_CORR=true Line 68: * Line 69: formatBat =GTiff Line 70: inFormat =GTiff Line 71: inFormat_NAMIDANCE =netcdf Line 72: inFormat_MOST =netcdf_NOAA Line 73: inFormat_HYSEA =netcdf_HYSEA Line 74: * Line 75: outFormat =GTiff Line 76: outFormat_CORR =netcdf Line 77: outFormat_NAMIDANCE =netcdf Line 78: outFormat_MOST =netcdf_NOAA Line 79: outFormat_HYSEA =netcdf_HYSEA Line 80: * Line 81: tarFilesAndDelete =true Line 82: deleteAnimFiles =true Line 83: deleteAnimFiles_NAMIDANCE=false Line 84: deleteAnimFiles_MOST=false Line 85: deleteAnimFiles_HYSEA=true Line 86: * Line 87: outTTT_TILES=false Line 88: * Line 89: * HYFLUX flags Line 90: mapfmt = PCRaster Line 91: mapext = .map Line 92: outfmt = GTiff Line 93: outext = .tif Line 94: radius=6378388. Line 95: houtmin = 1e-7 Line 96: voutmin = 1e-7 End of Reading file: /home/critechuser/operational/bin/config.txt /home/critechuser/operational/bin -i -i iDeck1.txt -o . -opt rel -code SWAN **** Start of file : ./iDeck1.txt Line 1: ********************************************* Line 2: * Tsunami input deck: Line 3: ********************************************* Line 4: * General data Line 5: Title ="176 km SSE of Ust’-Kamchatsk Staryy NP2" Line 6: outPath =(null) Line 7: * Line 8: DateTsunami =16 Mar 2021 18:38 Line 9: * Line 10: * Calculation parameters * Line 11: InTime =0.000000 * initial time (h) Line 12: FinTime =1.750000 * end time (h) Line 13: Tsave =1.000000 * t save (min) Line 14: dtMax =0.250000 * deltat (s) Line 15: fanning =0.015 Line 16: * Line 17: * Fault parameters (nfaults=1) * Line 18: *------------------------------------------- Line 19:Input file size is 43200, 21600 0...10...20...30...40...50...60...70...80...90...100 - done. FaultNumber 1 Line 20: *------------------------------------------- Line 21: * EPICENTER * Line 22: Lat =54.701801 * degree Line 23: Lon =163.207703 * degree Line 24: Mag =6.600000 * Richter scale Line 25: faultform =8 * Okada parameters Line 26: flenght =31.000000 * km Line 27: fwidth =8.000000 * km Line 28: strike =340.100006 * degree (geog North=0) Line 29: slip =0.898000 * m Line 30: dip =81.489998 * degree Line 31: rake =164.770004 * degree Line 32: depth =22.059999 * km (top of the fault) Line 33: ------end of fault 1 ------------ Line 34: * Line 35: FaultMode =0 Line 36: * Line 37: * Code parameters * Line 38: code =HYSEA Line 39: * Line 40: * Grid parameters * Line 41: constbat =False * for back compatibility Line 42: automscale =False * for back compatibility Line 43: width = 3.000000 * degree Line 44: batgrid =0.250000 * min Line 45: * Line 46: * calculation window Line 47: lonmin =161.707703 Line 48: lonmax =164.707703 Line 49: latmin =53.201801 Line 50: latmax =56.201801 Line 51: bathymetry =GEBCO30 **** End of file : ./iDeck1.txt ---| batmode = 3 gdal_translate -srcwin 41003 4054 362 362 /home/critechuser/operational/DATA/gebco30.tif ./clipFile.tif *** Interpolating clipped bathymetry. Dataset ./clipFile.tif ncols=720, nrows=720 ix=10/720 ix=20/720 ix=30/720 ix=40/720 ix=50/720 ix=60/720 ix=70/720 ix=80/720 ix=90/720 ix=100/720 ix=110/720 ix=120/720 ix=130/720 ix=140/720 ix=150/720 ix=160/720 ix=170/720 ix=180/720 ix=190/720 ix=200/720 ix=210/720 ix=220/720 ix=230/720 ix=240/720 ix=250/720 ix=260/720 ix=270/720 ix=280/720 ix=290/720 ix=300/720 ix=310/720 ix=320/720 ix=330/720 ix=340/720 ix=350/720 ix=360/720 ix=370/720 ix=380/720 ix=390/720 ix=400/720 ix=410/720 ix=420/720 ix=430/720 ix=440/720 ix=450/720 ix=460/720 ix=470/720 ix=480/720 ix=490/720 ix=500/720 ix=510/720 ix=520/720 ix=530/720 ix=540/720 ix=550/720 ix=560/720 ix=570/720 ix=580/720 ix=590/720 ix=600/720 ix=610/720 ix=620/720 ix=630/720 ix=640/720 ix=650/720 ix=660/720 ix=670/720 ix=680/720 ix=690/720 ix=700/720 ix=710/720 ix=720/720 Fault number 1 Calling Okada with slip=0.898000 and depth=22.059999 ! calling gdal factor 1 End of programme Reading inline arguments -i iDeck1.txt -o . -opt rel -code HYSEA Reading file: /home/critechuser/operational/bin/config.txt Line 1: **************** Line 2: *Output options Line 3: **************** Line 4: * Line 5: outTxt =false Line 6: * Line 7: outHTif_exec_SWAN =true Line 8: outHTif_exec_TILES=false Line 9: outHTif_post =false Line 10: * Line 11: outuvTif_exec_SWAN =true Line 12: outuvTif_exec_TILES=false Line 13: outuvTif_post =false Line 14: * Line 15: outBMP =false Line 16: outJPG =false Line 17: * Line 18: outGIF_exec_SWAN =true Line 19: outGIF_exec_TILES =false Line 20: outGIF_post_SWAN =false Line 21: outGIF_post_HYFLUX =true Line 22: outGIF_post_NAMIDANCE =true Line 23: outGIF_post_MOST =true Line 24: outGIF_post_CORR =false Line 25: outGIF_post_HYSEA =false Line 26: * Line 27: checkWatchPoints_exec_SWAN =true Line 28: checkWatchPoints_exec_TILES=true Line 29: checkWatchPoints_post_SWAN =false Line 30: checkWatchPoints_post_HYFLUX =true Line 31: checkWatchPoints_post_NAMIDANCE =true Line 32: checkWatchPoints_post_MOST =true Line 33: checkWatchPoints_post_CORR =true Line 34: checkWatchPoints_post_HYSEA=true Line 35: * Line 36: outkml_exec_SWAN =true Line 37: outkml_exec_TILES =false Line 38: outkml_post_SWAN =false Line 39: outkml_post_HYFLUX =true Line 40: outkml_post_NAMIDANCE =true Line 41: outkml_post_MOST =true Line 42: outkml_post_CORR =false Line 43: outkml_post_HYSEA =true Line 44: * Line 45: outGifAnimation_exec =false Line 46: outGifAnimation_post =true Line 47: outGifAnimation_post_CORR=false Line 48: * Line 49: intermediateAnimation =true Line 50: intermediateAnimation_CORR =false Line 51: * Line 52: tifH2netcdf_exec_SWAN =true Line 53: tifH2netcdf_exec_TILES=false Line 54: tifH2netcdf_post_SWAN =false Line 55: tifH2netcdf_post_HYFLUX=true Line 56: tifH2netcdf_post_NAMIDANCE=true Line 57: tifH2netcdf_post_CORR=false Line 58: * Line 59: tifuv2netcdf =false Line 60: * Line 61: writeWPtxtFiles_exec_SWAN=true Line 62: writeWPtxtFiles_exec_TILES=true Line 63: writeWPtxtFiles_post_SWAN=false Line 64: writeWPtxtFiles_post_HYFLUX=true Line 65: writeWPtxtFiles_post_NAMIDANCE=true Line 66: writeWPtxtFiles_post_MOST=true Line 67: writeWPtxtFiles_post_CORR=true Line 68: * Line 69: formatBat =GTiff Line 70: inFormat =GTiff Line 71: inFormat_NAMIDANCE =netcdf Line 72: inFormat_MOST =netcdf_NOAA Line 73: inFormat_HYSEA =netcdf_HYSEA Line 74: * Line 75: outFormat =GTiff Line 76: outFormat_CORR =netcdf Line 77: outFormat_NAMIDANCE =netcdf Line 78: outFormat_MOST =netcdf_NOAA Line 79: outFormat_HYSEA =netcdf_HYSEA Line 80: * Line 81: tarFilesAndDelete =true Line 82: deleteAnimFiles =true Line 83: deleteAnimFiles_NAMIDANCE=false Line 84: deleteAnimFiles_MOST=false Line 85: deleteAnimFiles_HYSEA=true Line 86: * Line 87: outTTT_TILES=false Line 88: * Line 89: * HYFLUX flags Line 90: mapfmt = PCRaster Line 91: mapext = .map Line 92: outfmt = GTiff Line 93: outext = .tif Line 94: radius=6378388. Line 95: houtmin = 1e-7 Line 96: voutmin = 1e-7 End of Reading file: /home/critechuser/operational/bin/config.txt Reading inline arguments -i iDeck1.txt -o . -opt rel -code HYSEA Reading file: ./iDeck1.txt Line 1: ********************************************* Line 2: * Tsunami input deck: Line 3: ********************************************* Line 4: * General data Line 5: Title ="176 km SSE of Ust’-Kamchatsk Staryy NP2" Line 6: outPath =(null) Line 7: * Line 8: DateTsunami =16 Mar 2021 18:38 Line 9: * Line 10: * Calculation parameters * Line 11: InTime =0.000000 * initial time (h) Line 12: FinTime =1.750000 * end time (h) Line 13: Tsave =1.000000 * t save (min) Line 14: dtMax =0.250000 * deltat (s) Line 15: fanning =0.015 Line 16: * Line 17: * Fault parameters (nfaults=1) * Line 18: *------------------------------------------- Line 19: FaultNumber 1 Line 20: *-on 161.707703 164.707703 53.201801 56.201801 =West East North South DPC=2.01600000000000000000 E=164.707703 W=161.707703 S=53.201801 N=56.201801 DPC=2.01600000000000000000 BATHY=5 LAB= ImageName=Image TTTBase= RUNTTT= BATHY=5 -Rg161.707703/164.707703/53.201801/56.201801 gmtgrdmath bathymetry.tif=gd DUP 20.0 LE MUL 0 NAN ISNAN = tmpbat.nc gmt grdmath deformation.tif=gd DUP 0.05 GE MUL 0 NAN ISNAN NOT = tmpdef.nc gmt grdmath tmpbat.nc=nf tmpdef.nc=nf MUL = epi.nc gmt grdmath epi.nc=nf DUP 1 EQ MUL 0 NAN = epi1.nc gmt grd2xyz -S epi1.nc > epi.txt ttt32 ttt_topo_5m -eepi.txt -Twave -VL ttt_pick32 -Gwave.b stations.txt - >travelTimeTAT.txt gmt grdimage wave.b=1 -Iintens.grd -Rg161.707703/164.707703/53.201801/56.201801 -Jx -Cttt.cpt -P -K -V -X0.75i > Image.ps Error: /undefined in A Operand stack: 0 Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1884 1 3 %oparray_pop 1883 1 3 %oparray_pop 1867 1 3 %oparray_pop 1755 1 3 %oparray_pop --nostringval-- %errorexec_pop .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- Dictionary stack: --dict:1166/1684(ro)(G)-- --dict:0/20(G)-- --dict:77/200(L)-- Current allocation mode is local Current file position is 4 Error: /undefined in A Operand stack: 0 Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1884 1 3 %oparray_pop 1883 1 3 %oparray_pop 1867 1 3 %oparray_pop 1755 1 3 %oparray_pop --nostringval-- %errorexec_pop .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- Dictionary stack: --dict:1166/1684(ro)(G)-- --dict:0/20(G)-- --dict:77/200(L)-- Current allocation mode is local Current file position is 4 on ------------------------------------------ Line 21: * EPICENTER * Line 22: Lat =54.701801 * degree Line 23: Lon =163.207703 * degree Line 24: Mag =6.600000 * Richter scale Line 25: faultform =8 * Okada parameters Line 26: flenght =31.000000 * km Line 27: fwidth =8.000000 * km Line 28: strike =340.100006 * degree (geog North=0) Line 29: slip =0.898000 * m Line 30: dip =81.489998 * degree Line 31: rake =164.770004 * degree Line 32: depth =22.059999 * km (top of the fault) Line 33: ------end of fault 1 ------------ Line 34: * Line 35: FaultMode =0 Line 36: * Line 37: * Code parameters * Line 38: code =HYSEA Line 39: * Line 40: * Grid parameters * Line 41: constbat =False * for back compatibility Line 42: automscale =False * for back compatibility Line 43: width = 3.000000 * degree Line 44: batgrid =0.250000 * min Line 45: * Line 46: * calculation window Line 47: lonmin =161.707703 Line 48: lonmax =164.707703 Line 49: latmin =53.201801 Line 50: latmax =56.201801 Line 51: bathymetry =GEBCO30 End of Reading file: ./iDeck1.txt informat=netcdf_HYSEA outformat=netcdf_HYSEA Reading bathymetry file ./bathymetry.tif outputDir=. Selecting place namesPlace names found in area: 2 Selecting place namesPlace names found in area: 2 Selecting measuring gauges /home/critechuser/operational/DATA/gauges.csv Gauges names found in area: -1 Selecting measuring gauges /home/critechuser/operational/DATA/gauges.csv Gauges names found in area: -1 ./epi.txt 0 163.219131 54.557587 1 163.209000 54.587021 2 163.198853 54.616451 3 163.188721 54.645885 4 163.178589 54.675316 5 163.168457 54.704750 6 163.158325 54.734180 7 163.148193 54.763611 8 163.138062 54.793045 9 163.127914 54.822475 10 163.287491 54.581127 11 163.277344 54.610558 12 163.267212 54.639992 13 163.257080 54.669422 14 163.246948 54.698853 15 163.236816 54.728287 16 163.226685 54.757717 17 163.216553 54.787151 18 163.206406 54.816582 19 163.196274 54.846016 /home/critechuser/operational/bin/runTTT.sh 161.707703 164.707703 53.201801 56.201801 720 End of Reading file: ./iDeck1.txt /home/critechuser/operational/bin -title -title "176_km_SSE_of_Ust’-Kamchatsk_Staryy_NP2" -dateEvent 16_Mar_2021_18:38 -Mag 6.6 -Lat 54.7018 -Lon 163.2077 -eqDepth 22.06 -i iDeck1.txt -o . -opt rel -code HYSEA -addparams -depthtype_topofthefault_-strike_340.1_-dip_81.49_-rake_164.77 Parsing addparams string: -depthtype_topofthefault_-strike_340.1_-dip_81.49_-rake_164.77 -depthtype=topofthefault -strike=340.1 -dip=81.49 -rake=164.77 -folderToRead ../coarse -inputToRead iDeck1.txt -hmin 1.0 -cellSize 1.0 searching faults Exiting from search fault Dist calculated from NOAA faults: 66.833397 km searching faults Exiting from search fault Dist calculated from MedEU faults: 13534.928711 km a Reading file: ../coarse/iDeck1.txt<<<< Line 1: ********************************************* Line 2: * Tsunami input deck: Line 3: ********************************************* Line 4: * General data Line 5: Title ="176 km SSE of Ust’-Kamchatsk Staryy NP2" Line 6: outPath =(null) Line 7: * Line 8: DateTsunami =16 Mar 2021 18:38 Line 9: * Line 10: * Calculation parameters * Line 11: InTime =0.000000 * initial time (h) Line 12: FinTime =1.750000 * end time (h) Line 13: Tsave =1.000000 * t save (min) Line 14: dtMax =0.250000 * deltat (s) Line 15: fanning =0.015 Line 16: * Line 17: * Fault parameters (nfaults=1) * Line 18: *------------------------------------------- Line 19: FaultNumber 1 Line 20: *------------------------------------------- Line 21: * EPICENTER * Line 22: Lat =54.701801 * degree Line 23: Lon =163.207703 * degree Line 24: Mag =6.600000 * Richter scale Line 25: faultform =8 * Okada parameters Line 26: flenght =31.000000 * km Line 27: fwidth =8.000000 * km Line 28: strike =340.100006 * degree (geog North=0) Line 29: slip =0.898000 * m Line 30: dip =81.489998 * degree Line 31: rake =164.770004 * degree Line 32: depth =22.059999 * km (top of the fault) Line 33: ------end of fault 1 ------------ Line 34: * Line 35: FaultMode =0 Line 36: * Line 37: * Code parameters * Line 38: code =HYSEA Line 39: * Line 40: * Grid parameters * Line 41: constbat =False * for back compatibility Line 42: automscale =False * for back compatibility Line 43: width = 3.000000 * degree Line 44: batgrid =0.250000 * min Line 45: * Line 46: * calculation window Line 47: lonmin =161.707703 Line 48: lonmax =164.707703 Line 49: latmin =53.201801 Line 50: latmax =56.201801 Line 51: bathymetry =GEBCO30 End of Reading file: ../coarse/iDeck1.txt Error Opening File ../coarse/locations.txt. hminOut=-1.000000 ** End of creation **