******************************************************* * Storm Surge Calculation System (SSCS) * ******************************************************* Now is : 2019-10-30 08:45:07.066203 UTC inp1= 20191029.18 ncores= 5 var= wind lw= aa.txt stormname!!!!!!!!!!!!!!!= 1000624/JTWC dtBullHolland= 6 submitting calc 2019-10-29 18:00:00 2019-10-30 00:00:00 delft3d 99.34 120.0 5.0 22.3 4.0 holland 72 15 True GDACS/1000624/1_holland 6 1 False False 5 aa.txt 20191029.18 1000624/JTWC 6 wind False *************---------------------****************** stormname 1000624/JTWC ndt: 2 it: 0 ndt: 2 idate: 2019-10-29 18:00:00 running case from 2019-10-29 18:00:00 for 6 h start= 1 var wind step *********** **** gometeo: 6 listWindows rundate:20191029.18 RUNNING 2019-10-29 18:00:00 for 6 hours creating /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/ ============================================ process meteo ============================================ 1. process meteo, starting at 2019-10-30 08:45:07.140685 ..1.1 calling Holl_2_netcdf... ************START 2019-10-30 00:00:00 2019-10-29 18:00:00 /mnt/output/GDACS/TC/TCTrack/ 2019-10-29 18:00:00 99.34 120.0 5.0 22.3 72 60 1000624 JTWC /mnt/output/SSCS/2019/GDACS/1000624/1_holland/ 4 5 6 1.0 step **** START Holl_2_netcdf **** using the following inputs: /mnt/output/GDACS/TC/TCTrack/ 2019-10-29 18:00:00 99.34 120.0 5.0 22.3 72 60 1000624 JTWC /mnt/output/SSCS/2019/GDACS/1000624/1_holland/ 4 5 6 >> 0. SET INPUTS / OUTPUT verifying Holl input file /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019102918/all_inpData.txt >> 1. PREPROCESSING HOLLAND PARAMETERS HollandDataFile /mnt/output/SSCS/2019/GDACS/1000624/1_holland/hollandData/20191029.18/all_hollandData.txt >> PREPROCESSING HOLLAND PARAMETERS creating Holland parameters using MC method /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019102918/all_inpData.txt ... START WR2H PROGRAM ... inputfile: /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019102918/all_inpData.txt outfile: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/hollandData/20191029.18/all_hollandData.txt ... END WR2H PROGRAM ... initial i0 0 maxt0: 36 maxtime: 72 36 3 72 0 3 0 [ 12.6 12.9 13.3 13.7] [ 0 12 24 36] [ 0 12 24 36] INTERPOLATION Holland data using 60 min interval totH: 36 latH1: [ 12.6 12.625 12.65 12.675 12.7 12.725 12.75 12.775 12.8 12.825 12.85 12.875 12.9 12.93333333 12.96666667 13. 13.03333333 13.06666667 13.1 13.13333333 13.16666667 13.2 13.23333333 13.26666667 13.3 13.33333333 13.36666667 13.4 13.43333333 13.46666667 13.5 13.53333333 13.56666667 13.6 13.63333333 13.66666667 13.7 ] timeH1: [ 0. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36.] >> 2. NETCDF FILES >>> 2.1 Final GRID !!!! 99.34 120.0 5.0 22.3 0.0666666666667 0.0 ('min lon: ', 99.34, 'max lon: ', 120.0, 'min lat: ', 5.0, 'max lat: ', 22.3) ('dcell: ', 0.06666666666666667, 'nintx,ninty: ', 309.9, 259.5, 'xcell shape', (259, 309), 'ycell shape', (259, 309)) >>> 2.2 WIND and PRESSURE fields...TIME LOOP.... timeH1 [ 0. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36.] STEP: 0 ..... timeH1[it], ht 0.0 0 minbeta 1.41777523565 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc ...creating nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp open netCDF file: ....writing lat, lon createnc ok 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 0 STEP: 1 ..... timeH1[it], ht 1.0 1.0 minbeta 1.83345353933 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 1 STEP: 2 ..... timeH1[it], ht 2.0 2.0 minbeta 0.45741370851 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 2 STEP: 3 ..... timeH1[it], ht 3.0 3.0 minbeta 1.86507994589 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 3 STEP: 4 ..... timeH1[it], ht 4.0 4.0 minbeta 0.967824911415 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 4 STEP: 5 ..... timeH1[it], ht 5.0 5.0 minbeta 0.725511797794 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 5 STEP: 6 ..... timeH1[it], ht 6.0 6.0 minbeta 1.8435180081 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 6 STEP: 7 ..... timeH1[it], ht 7.0 7.0 minbeta 0.377114226612 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 7 STEP: 8 ..... timeH1[it], ht 8.0 8.0 minbeta 1.18695294142 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 8 STEP: 9 ..... timeH1[it], ht 9.0 9.0 minbeta 1.12465445245 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 9 STEP: 10 ..... timeH1[it], ht 10.0 10.0 minbeta 0.341177748224 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 10 STEP: 11 ..... timeH1[it], ht 11.0 11.0 minbeta 1.57798739918 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 11 STEP: 12 ..... timeH1[it], ht 12.0 12.0 minbeta 0.544376118249 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 12 STEP: 13 ..... timeH1[it], ht 13.0 13.0 minbeta 0.807923423818 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 13 STEP: 14 ..... timeH1[it], ht 14.0 14.0 minbeta 1.03570389934 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 14 STEP: 15 ..... timeH1[it], ht 15.0 15.0 minbeta 1.07213861373 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 15 STEP: 16 ..... timeH1[it], ht 16.0 16.0 minbeta 0.496729268834 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 16 STEP: 17 ..... timeH1[it], ht 17.0 17.0 minbeta 0.856302569702 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 17 STEP: 18 ..... timeH1[it], ht 18.0 18.0 minbeta 1.18950669007 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 18 STEP: 19 ..... timeH1[it], ht 19.0 19.0 minbeta 0.942247583849 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 19 STEP: 20 ..... timeH1[it], ht 20.0 20.0 minbeta 0.498315596812 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 20 STEP: 21 ..... timeH1[it], ht 21.0 21.0 minbeta 0.929795089941 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 21 STEP: 22 ..... timeH1[it], ht 22.0 22.0 minbeta 1.20323445144 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 22 STEP: 23 ..... timeH1[it], ht 23.0 23.0 minbeta 0.823192344261 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 23 STEP: 24 ..... timeH1[it], ht 24.0 24.0 minbeta 0.548561845531 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 24 STEP: 25 ..... timeH1[it], ht 25.0 25.0 minbeta 1.25725967892 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 25 STEP: 26 ..... timeH1[it], ht 26.0 26.0 minbeta 0.644435025333 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 26 STEP: 27 ..... timeH1[it], ht 27.0 27.0 minbeta 0.858055895702 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 27 STEP: 28 ..... timeH1[it], ht 28.0 28.0 minbeta 1.02226200966 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 28 STEP: 29 ..... timeH1[it], ht 29.0 29.0 minbeta 0.638843113227 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 29 STEP: 30 ..... timeH1[it], ht 30.0 30.0 minbeta 1.11763150965 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 30 STEP: 31 ..... timeH1[it], ht 31.0 31.0 minbeta 0.771638004581 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 31 STEP: 32 ..... timeH1[it], ht 32.0 32.0 minbeta 0.738464301017 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 32 STEP: 33 ..... timeH1[it], ht 33.0 33.0 minbeta 1.13899409419 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 33 STEP: 34 ..... timeH1[it], ht 34.0 34.0 minbeta 0.597460153046 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 34 STEP: 35 ..... timeH1[it], ht 35.0 35.0 minbeta 1.04469141831 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 35 STEP: 36 ..... timeH1[it], ht 36.0 36.0 minbeta 0.826509108512 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc.tmp .... END STEP: 36 ....end time loop FINAL netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc **** END Holland **** fnamenetcdf: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191029.18.nc ret holland 0 ret: 0 removing submitted ALL ************** 2019-10-29 18:00:00 ret= 0 newcase= False forceFinal= False forceBulletin= False it: 1 ndt: 2 idate: 2019-10-30 00:00:00 running case from 2019-10-30 00:00:00 for 72 h start= 0 var wind step *********** **** gometeo: 72 listWindows rundate:20191030.00 RUNNING 2019-10-30 00:00:00 for 72 hours ============================================ process meteo ============================================ 1. process meteo, starting at 2019-10-30 08:45:16.334834 ..1.1 calling Holl_2_netcdf... ************START 2019-10-30 00:00:00 2019-10-30 00:00:00 /mnt/output/GDACS/TC/TCTrack/ 2019-10-30 00:00:00 99.34 120.0 5.0 22.3 72 60 1000624 JTWC /mnt/output/SSCS/2019/GDACS/1000624/1_holland/ 4 5 6 1.0 step **** START Holl_2_netcdf **** using the following inputs: /mnt/output/GDACS/TC/TCTrack/ 2019-10-30 00:00:00 99.34 120.0 5.0 22.3 72 60 1000624 JTWC /mnt/output/SSCS/2019/GDACS/1000624/1_holland/ 4 5 6 >> 0. SET INPUTS / OUTPUT verifying Holl input file /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019103000/all_inpData.txt >> 1. PREPROCESSING HOLLAND PARAMETERS HollandDataFile /mnt/output/SSCS/2019/GDACS/1000624/1_holland/hollandData/20191030.00/all_hollandData.txt >> PREPROCESSING HOLLAND PARAMETERS creating Holland parameters using MC method /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019103000/all_inpData.txt ... START WR2H PROGRAM ... inputfile: /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019103000/all_inpData.txt outfile: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/hollandData/20191030.00/all_hollandData.txt ... END WR2H PROGRAM ... initial i0 1 maxt0: 36 maxtime: 72 36 4 72 1 4 0 [ 13.2 13.6 13.9 14.2] [ 0 12 24 36] [ 0 12 24 36] INTERPOLATION Holland data using 60 min interval totH: 36 latH1: [ 13.2 13.23333333 13.26666667 13.3 13.33333333 13.36666667 13.4 13.43333333 13.46666667 13.5 13.53333333 13.56666667 13.6 13.625 13.65 13.675 13.7 13.725 13.75 13.775 13.8 13.825 13.85 13.875 13.9 13.925 13.95 13.975 14. 14.025 14.05 14.075 14.1 14.125 14.15 14.175 14.2 ] timeH1: [ 0. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36.] >> 2. NETCDF FILES >>> 2.1 Final GRID !!!! 99.34 120.0 5.0 22.3 0.0666666666667 0.0 ('min lon: ', 99.34, 'max lon: ', 120.0, 'min lat: ', 5.0, 'max lat: ', 22.3) ('dcell: ', 0.06666666666666667, 'nintx,ninty: ', 309.9, 259.5, 'xcell shape', (259, 309), 'ycell shape', (259, 309)) >>> 2.2 WIND and PRESSURE fields...TIME LOOP.... timeH1 [ 0. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36.] STEP: 0 ..... timeH1[it], ht 0.0 0 minbeta 0.948918279847 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc ...creating nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp open netCDF file: ....writing lat, lon createnc ok 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 0 STEP: 1 ..... timeH1[it], ht 1.0 1.0 minbeta 0.751072444538 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 1 STEP: 2 ..... timeH1[it], ht 2.0 2.0 minbeta 1.00321706465 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 2 STEP: 3 ..... timeH1[it], ht 3.0 3.0 minbeta 0.721728397438 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 3 STEP: 4 ..... timeH1[it], ht 4.0 4.0 minbeta 1.063020917 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 4 STEP: 5 ..... timeH1[it], ht 5.0 5.0 minbeta 0.697794153243 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 5 STEP: 6 ..... timeH1[it], ht 6.0 6.0 minbeta 1.12808372344 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 6 STEP: 7 ..... timeH1[it], ht 7.0 7.0 minbeta 0.680486187018 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 7 STEP: 8 ..... timeH1[it], ht 8.0 8.0 minbeta 1.19819338432 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 8 STEP: 9 ..... timeH1[it], ht 9.0 9.0 minbeta 0.671032933802 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 9 STEP: 10 ..... timeH1[it], ht 10.0 10.0 minbeta 1.27317667846 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 10 STEP: 11 ..... timeH1[it], ht 11.0 11.0 minbeta 0.670549963899 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 11 STEP: 12 ..... timeH1[it], ht 12.0 12.0 minbeta 1.35290075805 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 12 STEP: 13 ..... timeH1[it], ht 13.0 13.0 minbeta 1.57486880756 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 13 STEP: 14 ..... timeH1[it], ht 14.0 14.0 minbeta 1.26357638876 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 14 STEP: 15 ..... timeH1[it], ht 15.0 15.0 minbeta 1.6399930358 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 15 STEP: 16 ..... timeH1[it], ht 16.0 16.0 minbeta 1.42498409174 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 16 STEP: 17 ..... timeH1[it], ht 17.0 17.0 minbeta 1.24395313673 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 17 STEP: 18 ..... timeH1[it], ht 18.0 18.0 minbeta 1.75323353157 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 18 STEP: 19 ..... timeH1[it], ht 19.0 19.0 minbeta 1.16487445676 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 19 STEP: 20 ..... timeH1[it], ht 20.0 20.0 minbeta 1.23487786548 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 20 STEP: 21 ..... timeH1[it], ht 21.0 21.0 minbeta 1.45536597014 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 21 STEP: 22 ..... timeH1[it], ht 22.0 22.0 minbeta 0.963147212866 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 22 STEP: 23 ..... timeH1[it], ht 23.0 23.0 minbeta 1.32165572805 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 23 STEP: 24 ..... timeH1[it], ht 24.0 24.0 minbeta 1.13224945198 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 24 STEP: 25 ..... timeH1[it], ht 25.0 25.0 minbeta 0.549727849493 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 25 STEP: 26 ..... timeH1[it], ht 26.0 26.0 minbeta 1.49591654484 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 26 STEP: 27 ..... timeH1[it], ht 27.0 27.0 minbeta 0.693005758574 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 27 STEP: 28 ..... timeH1[it], ht 28.0 28.0 minbeta 0.919779198689 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 28 STEP: 29 ..... timeH1[it], ht 29.0 29.0 minbeta 1.26649297727 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 29 STEP: 30 ..... timeH1[it], ht 30.0 30.0 minbeta 0.632547392891 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 30 STEP: 31 ..... timeH1[it], ht 31.0 31.0 minbeta 1.15720382564 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 31 STEP: 32 ..... timeH1[it], ht 32.0 32.0 minbeta 0.948743738911 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 32 STEP: 33 ..... timeH1[it], ht 33.0 33.0 minbeta 0.828130231181 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 33 STEP: 34 ..... timeH1[it], ht 34.0 34.0 minbeta 1.3117675555 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 34 STEP: 35 ..... timeH1[it], ht 35.0 35.0 minbeta 0.988996062816 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 35 STEP: 36 ..... timeH1[it], ht 36.0 36.0 minbeta 0.666318785386 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc.tmp .... END STEP: 36 ....end time loop FINAL netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc **** END Holland **** fnamenetcdf: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00.nc ret holland 0 ret: 0 removing submitted ALL ************** 2019-10-30 00:00:00 with createncHoll **** gometeo: 72 listWindows rundate:20191030.00 RUNNING 2019-10-30 00:00:00 for 72 hours ============================================ process meteo ============================================ 1. process meteo, starting at 2019-10-30 08:45:24.872765 ..1.1 calling Holl_2_netcdf... ************START 2019-10-30 00:00:00 2019-10-30 00:00:00 /mnt/output/GDACS/TC/TCTrack/ 2019-10-30 00:00:00 99.34 120.0 5.0 22.3 72 60 1000624 JTWC /mnt/output/SSCS/2019/GDACS/1000624/1_holland/ 4 5 6 1.0 minusdelta **** START Holl_2_netcdf **** using the following inputs: /mnt/output/GDACS/TC/TCTrack/ 2019-10-30 00:00:00 99.34 120.0 5.0 22.3 72 60 1000624 JTWC /mnt/output/SSCS/2019/GDACS/1000624/1_holland/ 4 5 6 >> 0. SET INPUTS / OUTPUT verifying Holl input file /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019103000/all_inpData.txt >> 1. PREPROCESSING HOLLAND PARAMETERS HollandDataFile /mnt/output/SSCS/2019/GDACS/1000624/1_holland/hollandData/20191030.00/all_hollandData.txt holland file already exist..reading... initial i0 1 minusdelta i0: 0 i0init: 1 ht: -6 timeMC[i0] -6 maxt0: 36 maxtime: 72 36 4 72 0 4 -6 [ 12.6 13.2 13.6 13.9 14.2] [-6 0 12 24 36] [-6 0 12 24 36] INTERPOLATION Holland data using 60 min interval totH: 36 latH1: [ 12.6 12.7 12.8 12.9 13. 13.1 13.2 13.23333333 13.26666667 13.3 13.33333333 13.36666667 13.4 13.43333333 13.46666667 13.5 13.53333333 13.56666667 13.6 13.625 13.65 13.675 13.7 13.725 13.75 13.775 13.8 13.825 13.85 13.875 13.9 13.925 13.95 13.975 14. 14.025 14.05 14.075 14.1 14.125 14.15 14.175 14.2 ] timeH1: [ 0. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42.] >> 2. NETCDF FILES >>> 2.1 Final GRID !!!! 99.34 120.0 5.0 22.3 0.0666666666667 0.0 ('min lon: ', 99.34, 'max lon: ', 120.0, 'min lat: ', 5.0, 'max lat: ', 22.3) ('dcell: ', 0.06666666666666667, 'nintx,ninty: ', 309.9, 259.5, 'xcell shape', (259, 309), 'ycell shape', (259, 309)) >>> 2.2 WIND and PRESSURE fields...TIME LOOP.... timeH1 [ 0. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42.] STEP: 0 ..... timeH1[it], ht 0.0 -6 minbeta 1.41777523565 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc ...creating nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp open netCDF file: ....writing lat, lon createnc ok 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 0 STEP: 1 ..... timeH1[it], ht 1.0 -5.0 minbeta 1.19770961799 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 1 STEP: 2 ..... timeH1[it], ht 2.0 -4.0 minbeta 1.20555197553 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 2 STEP: 3 ..... timeH1[it], ht 3.0 -3.0 minbeta 0.983355355758 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 3 STEP: 4 ..... timeH1[it], ht 4.0 -2.0 minbeta 1.05652432401 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 4 STEP: 5 ..... timeH1[it], ht 5.0 -1.0 minbeta 0.828552729874 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 5 STEP: 6 ..... timeH1[it], ht 6.0 0.0 minbeta 0.948918374508 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 6 STEP: 7 ..... timeH1[it], ht 7.0 1.0 minbeta 0.751072510471 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 7 STEP: 8 ..... timeH1[it], ht 8.0 2.0 minbeta 1.00321714053 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 8 STEP: 9 ..... timeH1[it], ht 9.0 3.0 minbeta 0.721728443136 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 9 STEP: 10 ..... timeH1[it], ht 10.0 4.0 minbeta 1.06302097101 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 10 STEP: 11 ..... timeH1[it], ht 11.0 5.0 minbeta 0.697794179848 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 11 STEP: 12 ..... timeH1[it], ht 12.0 6.0 minbeta 1.12808375193 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 12 STEP: 13 ..... timeH1[it], ht 13.0 7.0 minbeta 0.680486195308 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 13 STEP: 14 ..... timeH1[it], ht 14.0 8.0 minbeta 1.19819338302 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 14 STEP: 15 ..... timeH1[it], ht 15.0 9.0 minbeta 0.671032924035 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 15 STEP: 16 ..... timeH1[it], ht 16.0 10.0 minbeta 1.27317664252 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 16 STEP: 17 ..... timeH1[it], ht 17.0 11.0 minbeta 0.670549935657 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 17 STEP: 18 ..... timeH1[it], ht 18.0 12.0 minbeta 1.35290068199 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 18 STEP: 19 ..... timeH1[it], ht 19.0 13.0 minbeta 1.57486871902 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 19 STEP: 20 ..... timeH1[it], ht 20.0 14.0 minbeta 1.26357631772 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 20 STEP: 21 ..... timeH1[it], ht 21.0 15.0 minbeta 1.63999294359 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 21 STEP: 22 ..... timeH1[it], ht 22.0 16.0 minbeta 1.42498401163 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 22 STEP: 23 ..... timeH1[it], ht 23.0 17.0 minbeta 1.24395306679 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 23 STEP: 24 ..... timeH1[it], ht 24.0 18.0 minbeta 1.753233433 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 24 STEP: 25 ..... timeH1[it], ht 25.0 19.0 minbeta 1.16487439127 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 25 STEP: 26 ..... timeH1[it], ht 26.0 20.0 minbeta 1.23487779606 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 26 STEP: 27 ..... timeH1[it], ht 27.0 21.0 minbeta 1.45536588832 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 27 STEP: 28 ..... timeH1[it], ht 28.0 22.0 minbeta 0.963147158716 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 28 STEP: 29 ..... timeH1[it], ht 29.0 23.0 minbeta 1.32165565374 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 29 STEP: 30 ..... timeH1[it], ht 30.0 24.0 minbeta 1.13224938832 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 30 STEP: 31 ..... timeH1[it], ht 31.0 25.0 minbeta 0.549727818587 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 31 STEP: 32 ..... timeH1[it], ht 32.0 26.0 minbeta 1.49591646074 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 32 STEP: 33 ..... timeH1[it], ht 33.0 27.0 minbeta 0.693005719612 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 33 STEP: 34 ..... timeH1[it], ht 34.0 28.0 minbeta 0.919779146977 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 34 STEP: 35 ..... timeH1[it], ht 35.0 29.0 minbeta 1.26649290606 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 35 STEP: 36 ..... timeH1[it], ht 36.0 30.0 minbeta 0.632547357328 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 36 STEP: 37 ..... timeH1[it], ht 37.0 31.0 minbeta 1.15720376058 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 37 STEP: 38 ..... timeH1[it], ht 38.0 32.0 minbeta 0.948743685571 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 38 STEP: 39 ..... timeH1[it], ht 39.0 33.0 minbeta 0.828130184622 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 39 STEP: 40 ..... timeH1[it], ht 40.0 34.0 minbeta 1.31176748175 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 40 STEP: 41 ..... timeH1[it], ht 41.0 35.0 minbeta 0.988996007213 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 41 STEP: 42 ..... timeH1[it], ht 42.0 36.0 minbeta 0.666318747924 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc.tmp .... END STEP: 42 ....end time loop FINAL netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc **** END Holland **** fnamenetcdf: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_minusdelta.nc ret holland 0 ret: 0 removing submitted /mnt/output/SSCS/2019/GDACS/1000624/1_holland/ 2019-10-29 18:00:00 2019-10-30 00:00:00 6 currdate,prevdate 2019-10-30 00:00:00 2019-10-29 18:00:00 np.shape(alldate) 2 np.shape(alldate)*dtbull 12 output netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc create past all /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.opening with createncHoll -5 with goMeteo **** gometeo: 72 listWindows rundate:20191030.00 RUNNING 2019-10-30 00:00:00 for 72 hours ============================================ process meteo ============================================ 1. process meteo, starting at 2019-10-30 08:45:35.096561 ..1.1 calling Holl_2_netcdf... ************START 2019-10-30 00:00:00 2019-10-30 00:00:00 /mnt/output/GDACS/TC/TCTrack/ 2019-10-30 00:00:00 99.34 120.0 5.0 22.3 72 60 1000624 JTWC /mnt/output/SSCS/2019/GDACS/1000624/1_holland/ 4 5 6 1.0 all **** START Holl_2_netcdf **** using the following inputs: /mnt/output/GDACS/TC/TCTrack/ 2019-10-30 00:00:00 99.34 120.0 5.0 22.3 72 60 1000624 JTWC /mnt/output/SSCS/2019/GDACS/1000624/1_holland/ 4 5 6 >> 0. SET INPUTS / OUTPUT verifying Holl input file /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019103000/all_inpData.txt >> 1. PREPROCESSING HOLLAND PARAMETERS HollandDataFile /mnt/output/SSCS/2019/GDACS/1000624/1_holland/hollandData/20191030.00/all_hollandData.txt holland file already exist..reading... initial i0 1 ****** ALL TRACK !!!********** -----startdate 2019-10-30 00:00:00 ht -6 maxt0: 36 maxtime: 72 36 4 72 0 4 -6 [ 12.6 13.2 13.6 13.9 14.2] [-6 0 12 24 36] ****** ********** all [ 0 6 18 30 42] INTERPOLATION Holland data using 60 min interval totH: 42 latH1: [ 12.6 12.7 12.8 12.9 13. 13.1 13.2 13.23333333 13.26666667 13.3 13.33333333 13.36666667 13.4 13.43333333 13.46666667 13.5 13.53333333 13.56666667 13.6 13.625 13.65 13.675 13.7 13.725 13.75 13.775 13.8 13.825 13.85 13.875 13.9 13.925 13.95 13.975 14. 14.025 14.05 14.075 14.1 14.125 14.15 14.175 14.2 ] timeH1: [ 0. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42.] >> 2. NETCDF FILES >>> 2.1 Final GRID !!!! 99.34 120.0 5.0 22.3 0.0666666666667 0.0 ('min lon: ', 99.34, 'max lon: ', 120.0, 'min lat: ', 5.0, 'max lat: ', 22.3) ('dcell: ', 0.06666666666666667, 'nintx,ninty: ', 309.9, 259.5, 'xcell shape', (259, 309), 'ycell shape', (259, 309)) >>> 2.2 WIND and PRESSURE fields...TIME LOOP.... timeH1 [ 0. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42.] STEP: 0 ..... timeH1[it], ht 0.0 -6 minbeta 1.41777523565 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc ...creating nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp open netCDF file: ....writing lat, lon createnc ok 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 0 STEP: 1 ..... timeH1[it], ht 1.0 -5.0 minbeta 1.19770961799 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 1 STEP: 2 ..... timeH1[it], ht 2.0 -4.0 minbeta 1.20555197553 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 2 STEP: 3 ..... timeH1[it], ht 3.0 -3.0 minbeta 0.983355355758 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 3 STEP: 4 ..... timeH1[it], ht 4.0 -2.0 minbeta 1.05652432401 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 4 STEP: 5 ..... timeH1[it], ht 5.0 -1.0 minbeta 0.828552729874 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 5 STEP: 6 ..... timeH1[it], ht 6.0 0.0 minbeta 0.948918374508 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 6 STEP: 7 ..... timeH1[it], ht 7.0 1.0 minbeta 0.751072510471 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 7 STEP: 8 ..... timeH1[it], ht 8.0 2.0 minbeta 1.00321714053 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 8 STEP: 9 ..... timeH1[it], ht 9.0 3.0 minbeta 0.721728443136 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 9 STEP: 10 ..... timeH1[it], ht 10.0 4.0 minbeta 1.06302097101 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 10 STEP: 11 ..... timeH1[it], ht 11.0 5.0 minbeta 0.697794179848 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 11 STEP: 12 ..... timeH1[it], ht 12.0 6.0 minbeta 1.12808375193 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 12 STEP: 13 ..... timeH1[it], ht 13.0 7.0 minbeta 0.680486195308 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 13 STEP: 14 ..... timeH1[it], ht 14.0 8.0 minbeta 1.19819338302 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 14 STEP: 15 ..... timeH1[it], ht 15.0 9.0 minbeta 0.671032924035 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 15 STEP: 16 ..... timeH1[it], ht 16.0 10.0 minbeta 1.27317664252 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 16 STEP: 17 ..... timeH1[it], ht 17.0 11.0 minbeta 0.670549935657 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 17 STEP: 18 ..... timeH1[it], ht 18.0 12.0 minbeta 1.35290068199 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 18 STEP: 19 ..... timeH1[it], ht 19.0 13.0 minbeta 1.57486871902 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 19 STEP: 20 ..... timeH1[it], ht 20.0 14.0 minbeta 1.26357631772 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 20 STEP: 21 ..... timeH1[it], ht 21.0 15.0 minbeta 1.63999294359 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 21 STEP: 22 ..... timeH1[it], ht 22.0 16.0 minbeta 1.42498401163 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 22 STEP: 23 ..... timeH1[it], ht 23.0 17.0 minbeta 1.24395306679 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 23 STEP: 24 ..... timeH1[it], ht 24.0 18.0 minbeta 1.753233433 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 24 STEP: 25 ..... timeH1[it], ht 25.0 19.0 minbeta 1.16487439127 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 25 STEP: 26 ..... timeH1[it], ht 26.0 20.0 minbeta 1.23487779606 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 26 STEP: 27 ..... timeH1[it], ht 27.0 21.0 minbeta 1.45536588832 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 27 STEP: 28 ..... timeH1[it], ht 28.0 22.0 minbeta 0.963147158716 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 28 STEP: 29 ..... timeH1[it], ht 29.0 23.0 minbeta 1.32165565374 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 29 STEP: 30 ..... timeH1[it], ht 30.0 24.0 minbeta 1.13224938832 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 30 STEP: 31 ..... timeH1[it], ht 31.0 25.0 minbeta 0.549727818587 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 31 STEP: 32 ..... timeH1[it], ht 32.0 26.0 minbeta 1.49591646074 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 32 STEP: 33 ..... timeH1[it], ht 33.0 27.0 minbeta 0.693005719612 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 33 STEP: 34 ..... timeH1[it], ht 34.0 28.0 minbeta 0.919779146977 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 34 STEP: 35 ..... timeH1[it], ht 35.0 29.0 minbeta 1.26649290606 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 35 STEP: 36 ..... timeH1[it], ht 36.0 30.0 minbeta 0.632547357328 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 36 STEP: 37 ..... timeH1[it], ht 37.0 31.0 minbeta 1.15720376058 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 37 STEP: 38 ..... timeH1[it], ht 38.0 32.0 minbeta 0.948743685571 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 38 STEP: 39 ..... timeH1[it], ht 39.0 33.0 minbeta 0.828130184622 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 39 STEP: 40 ..... timeH1[it], ht 40.0 34.0 minbeta 1.31176748175 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 40 STEP: 41 ..... timeH1[it], ht 41.0 35.0 minbeta 0.988996007213 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 41 STEP: 42 ..... timeH1[it], ht 42.0 36.0 minbeta 0.666318747924 maxbeta 25.0 creating netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc 309 259 (309, 259) ...appending nc file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.tmp .... END STEP: 42 ....end time loop FINAL netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc **** END Holland **** fnamenetcdf: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc ret holland 0 ret: 0 removing submitted ret= 0 newcase= True forceFinal= False forceBulletin= False home dir /mnt/output/SSCS/2019/GDACS/1000624/1_holland/ ret 0 classifications ============================================ 1. Set INPUT/OUTPUT ============================================ startdate 2019-10-29 18:00:00 currdate 2019-10-30 00:00:00 ndt: 6 delta: 6 nt1=delta 6 nt 72 alldate: DatetimeIndex(['2019-10-29 18:00:00', '2019-10-30 00:00:00'], dtype='datetime64[ns]', freq='6H') ============================================ 2. Processing meteo files: nc2tif ============================================ >> 2.1. Process curr + past files lon0,lon1,lat0,lat1 99.34 120.0 5.0 22.3 processing curr bull... 2019-10-30 00:00:00 forcing holland verifying that input file is present wind [-6 0 12 24 36] maxt0: 36 maxtime: 72 36 4 [ 0 12 24 36] start reading nc... wind not all inp data in netcdf file, used ntNC 37 ...create velAll ...start calculating velAll ...end calculating velAll nt,nx,ny, ntmax 37 259 309 73 forcing holland >> 0. SET INPUT/OUTPUT JTWC /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019103000/all_inpData.txt /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019103000/all_inpData.txt trackfile /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019103000/all_inpData.txt 99.34 120.0 5.0 22.3 lon 309 lat 259 read TC track /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019103000/all_inpData.txt currDate 2019-10-30 00:00:00 f 2 nt-1 71 nt 72 currDate1 2019-10-30 00:00:00 2019-11-02 00:00:00 sdate 2019-11-02 00:00:00 -2 CAT ['TD', 'TS', 'TS', 'TD'] savemap /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191030.00/20191030.00_wind.jpg processing all past bull only if Past=True... True itdate, istime 2019-10-29 18:00:00 20191029.18 forcing holland verifying that input file is present wind [ 0 12 24 36] maxt0: 36 maxtime: 72 36 3 [ 0 12 24 36] start reading nc... wind not all inp data in netcdf file, used ntNC 37 ...create velAll ...start calculating velAll ...end calculating velAll nt,nx,ny, ntmax 37 259 309 73 forcing holland >> 0. SET INPUT/OUTPUT JTWC /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019102918/all_inpData.txt /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019102918/all_inpData.txt trackfile /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019102918/all_inpData.txt 99.34 120.0 5.0 22.3 lon 309 lat 259 read TC track /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019102918/all_inpData.txt currDate 2019-10-29 18:00:00 f 1 nt-1 71 nt 72 currDate1 2019-10-29 18:00:00 2019-11-01 18:00:00 sdate 2019-11-01 18:00:00 -2 CAT ['TD', 'TS', 'TD'] savemap /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191029.18/20191029.18_wind.jpg >> 2.2. Process final data files compfile /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/final/20191030.00_Final_completed_wind.txt FINAL start reading nc... wind ...start calculating velAll ...end calculating velAll stormname 1000624/JTWC stormname 1000624/JTWC TCbullsource JTWC *******!!!!!!!!!!!! >> 0. SET INPUT/OUTPUT JTWC /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019103000/all_inpData.txt /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019103000/all_inpData.txt trackfile /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019103000/all_inpData.txt 99.34 120.0 5.0 22.3 lon 309 lat 259 read TC track /mnt/output/GDACS/TC/TCTrack/1000624/JTWC/2019103000/all_inpData.txt currDate 2019-10-30 00:00:00 f 2 nt-1 71 nt 72 currDate1 2019-10-30 00:00:00 2019-11-02 00:00:00 sdate 2019-11-02 00:00:00 -2 CAT ['TD', 'TS', 'TS', 'TD'] savemap /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/final/wind_FINAL.jpg ret: 0 ============================================ 3. Classify meteo + GDACS index score ============================================ >> 3.1. Classify curr + past forecast Creating output file that is 2484P x 2082L. Processing input file /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191029.18/20191029.18_wind_stept0.tif. Using internal nodata values (e.g. -999) for image /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191029.18/20191029.18_wind_stept0.tif. Copying nodata values from source /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191029.18/20191029.18_wind_stept0.tif to destination /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18//wind10m_res_stept0.tif. 0..Creating output file that is 2484P x 2082L. Processing input file /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191030.00/20191030.00_wind_stept0.tif. Using internal nodata values (e.g. -999) for image /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191030.00/20191030.00_wind_stept0.tif. Copying nodata values from source /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191030.00/20191030.00_wind_stept0.tif to destination /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00//wind10m_res_stept0.tif. 0..10.....1020......3020......4030.....50..40....60...50..70....60..80.....7090......80...90...100 - done. 100 - done. Creating output file that is 2484P x 2082L. Processing input file /mnt/output/GDACS/DATA/lspop20141.tif. Using internal nodata values (e.g. -2.14748e+09) for image /mnt/output/GDACS/DATA/lspop20141.tif. Copying nodata values from source /mnt/output/GDACS/DATA/lspop20141.tif to destination /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00//wind10m_popfile_stept0_clipped.tif. 0Creating output file that is 2484P x 2082L. Processing input file /mnt/output/GDACS/DATA/lspop20141.tif. Using internal nodata values (e.g. -2.14748e+09) for image /mnt/output/GDACS/DATA/lspop20141.tif. Copying nodata values from source /mnt/output/GDACS/DATA/lspop20141.tif to destination /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18//wind10m_popfile_stept0_clipped.tif. 0.....10..10....20..20....30..30....40..40....50..50....60..60...70....70..80....80..90....90....100 - done. 100 - done. Creating output file that is 2484P x 2082L. Processing input file /mnt/output/GDACS/DATA/countries.tif. Using internal nodata values (e.g. -32768) for image /mnt/output/GDACS/DATA/countries.tif. Copying nodata values from source /mnt/output/GDACS/DATA/countries.tif to destination /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00//wind10m_countryfile_stept0_clipped.tif. 0...10..Creating output file that is 2484P x 2082L. Processing input file /mnt/output/GDACS/DATA/countries.tif. Using internal nodata values (e.g. -32768) for image /mnt/output/GDACS/DATA/countries.tif. Copying nodata values from source /mnt/output/GDACS/DATA/countries.tif to destination /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18//wind10m_countryfile_stept0_clipped.tif. 0.20.....30..10...40.....2050.....60..30...70.....4080......9050......60...70...80...90...100 - done. 100 - done. input var: wind10m Input File: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191030.00/20191030.00_wind_stept0.tif hurName: hdate: var: wind10m description: wind10m: _ (holland) OutDir: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00// PopFile: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00//wind10m_popfile_stept0_clipped.tif country: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00//wind10m_countryfile_stept0_clipped.tif outxml file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00/wind_popDensValues_stept0.xml popfile: LandScan popCellSize= 0.00833333333333 projection= GEOGCS["WGS 84",DATUM["WGS_1984",SPHEROID["WGS 84",6378137,298.257223563,AUTHORITY["EPSG","7030"]],AUTHORITY["EPSG","6326"]],PRIMEM["Greenwich",0],UNIT["degree",0.0174532925199433],AUTHORITY["EPSG","4326"]] >> 1. resample the tif file to the resolution and proj of pop density 0.00833333333333 deg >> 2. read the charactristics of the input file >> 3a. extract a piece of pop. file corresponding to the required bounding box split,rastershift False -1 99.34 4.95000000001 120.04 22.3 holland /usr/bin/gdalwarp -te 99.34 4.95000000001 120.04 22.3 "/mnt/output/GDACS/DATA/lspop20141.tif" "/mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00//wind10m_popfile_stept0_clipped.tif" >> 3b. extract a piece of countries corresponding to the required bounding box and resolution/proj of pop density gdalwarp -r near -tr 0.00833333333333 0.00833333333333 -te 99.34 4.95000000001 120.04 22.3 "/mnt/output/GDACS/DATA/countries.tif" "/mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00//wind10m_countryfile_stept0_clipped.tif" >> 4. classify the vmax file creating another array of values classified cellsize 0.00833333333333 cellsize 0.00833333333333 cellsize 0.00833333333333 >> 6. print / save output in /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00/wind_popDensValues_stept0.xml >> 7. remove files done input var: wind10m Input File: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191029.18/20191029.18_wind_stept0.tif hurName: hdate: var: wind10m description: wind10m: _ (holland) OutDir: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18// PopFile: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18//wind10m_popfile_stept0_clipped.tif country: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18//wind10m_countryfile_stept0_clipped.tif outxml file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18/wind_popDensValues_stept0.xml popfile: LandScan popCellSize= 0.00833333333333 projection= GEOGCS["WGS 84",DATUM["WGS_1984",SPHEROID["WGS 84",6378137,298.257223563,AUTHORITY["EPSG","7030"]],AUTHORITY["EPSG","6326"]],PRIMEM["Greenwich",0],UNIT["degree",0.0174532925199433],AUTHORITY["EPSG","4326"]] >> 1. resample the tif file to the resolution and proj of pop density 0.00833333333333 deg >> 2. read the charactristics of the input file >> 3a. extract a piece of pop. file corresponding to the required bounding box split,rastershift False -1 99.34 4.95000000001 120.04 22.3 holland /usr/bin/gdalwarp -te 99.34 4.95000000001 120.04 22.3 "/mnt/output/GDACS/DATA/lspop20141.tif" "/mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18//wind10m_popfile_stept0_clipped.tif" >> 3b. extract a piece of countries corresponding to the required bounding box and resolution/proj of pop density gdalwarp -r near -tr 0.00833333333333 0.00833333333333 -te 99.34 4.95000000001 120.04 22.3 "/mnt/output/GDACS/DATA/countries.tif" "/mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18//wind10m_countryfile_stept0_clipped.tif" >> 4. classify the vmax file creating another array of values classified cellsize 0.00833333333333 cellsize 0.00833333333333 cellsize 0.00833333333333 >> 6. print / save output in /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18/wind_popDensValues_stept0.xml >> 7. remove files done t0 completed Creating output file that is 2484P x 2082L. Processing input file /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191030.00/20191030.00_wind.tif. Using internal nodata values (e.g. -999) for image /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191030.00/20191030.00_wind.tif. Copying nodata values from source /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191030.00/20191030.00_wind.tif to destination /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00//wind10m_res_all.tif. 0..Creating output file that is 2484P x 2082L. Processing input file /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191029.18/20191029.18_wind.tif. Using internal nodata values (e.g. -999) for image /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191029.18/20191029.18_wind.tif. Copying nodata values from source /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191029.18/20191029.18_wind.tif to destination /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18//wind10m_res_all.tif. 0..10.....1020......3020......4030.....50..40...60....50..70.....6080......7090......80...90...100 - done. 100 - done. Creating output file that is 2484P x 2082L. Processing input file /mnt/output/GDACS/DATA/lspop20141.tif. Using internal nodata values (e.g. -2.14748e+09) for image /mnt/output/GDACS/DATA/lspop20141.tif. Copying nodata values from source /mnt/output/GDACS/DATA/lspop20141.tif to destination /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00//wind10m_popfile_all_clipped.tif. 0...10Creating output file that is 2484P x 2082L. Processing input file /mnt/output/GDACS/DATA/lspop20141.tif. Using internal nodata values (e.g. -2.14748e+09) for image /mnt/output/GDACS/DATA/lspop20141.tif. Copying nodata values from source /mnt/output/GDACS/DATA/lspop20141.tif to destination /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18//wind10m_popfile_all_clipped.tif. 0......20.10....30..20....40..30....50..40....60..50....70..60...80....70..90....80....90...100 - done. 100 - done. Creating output file that is 2484P x 2082L. Processing input file /mnt/output/GDACS/DATA/countries.tif. Using internal nodata values (e.g. -32768) for image /mnt/output/GDACS/DATA/countries.tif. Copying nodata values from source /mnt/output/GDACS/DATA/countries.tif to destination /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18//wind10m_countryfile_all_clipped.tif. 0.Creating output file that is 2484P x 2082L. Processing input file /mnt/output/GDACS/DATA/countries.tif. Using internal nodata values (e.g. -32768) for image /mnt/output/GDACS/DATA/countries.tif. Copying nodata values from source /mnt/output/GDACS/DATA/countries.tif to destination /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00//wind10m_countryfile_all_clipped.tif. 0....10...10..20....20..30.....3040......4050......6050.....70..60....80...70..90....80....90...100 - done. 100 - done. input var: wind10m Input File: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191029.18/20191029.18_wind.tif hurName: hdate: var: wind10m description: wind10m: _ (holland) OutDir: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18// PopFile: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18//wind10m_popfile_all_clipped.tif country: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18//wind10m_countryfile_all_clipped.tif outxml file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18/wind_popDensValues_all.xml popfile: LandScan popCellSize= 0.00833333333333 projection= GEOGCS["WGS 84",DATUM["WGS_1984",SPHEROID["WGS 84",6378137,298.257223563,AUTHORITY["EPSG","7030"]],AUTHORITY["EPSG","6326"]],PRIMEM["Greenwich",0],UNIT["degree",0.0174532925199433],AUTHORITY["EPSG","4326"]] >> 1. resample the tif file to the resolution and proj of pop density 0.00833333333333 deg >> 2. read the charactristics of the input file >> 3a. extract a piece of pop. file corresponding to the required bounding box split,rastershift False -1 99.34 4.95000000001 120.04 22.3 holland /usr/bin/gdalwarp -te 99.34 4.95000000001 120.04 22.3 "/mnt/output/GDACS/DATA/lspop20141.tif" "/mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18//wind10m_popfile_all_clipped.tif" >> 3b. extract a piece of countries corresponding to the required bounding box and resolution/proj of pop density gdalwarp -r near -tr 0.00833333333333 0.00833333333333 -te 99.34 4.95000000001 120.04 22.3 "/mnt/output/GDACS/DATA/countries.tif" "/mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18//wind10m_countryfile_all_clipped.tif" >> 4. classify the vmax file creating another array of values classified cellsize 0.00833333333333 cellsize 0.00833333333333 cellsize 0.00833333333333 >> 5. count the popolation in each cell and assign to the class and write to output >> 6. print / save output in /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18/wind_popDensValues_all.xml >> 7. remove files done input var: wind10m Input File: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191030.00/20191030.00_wind.tif hurName: hdate: var: wind10m description: wind10m: _ (holland) OutDir: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00// PopFile: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00//wind10m_popfile_all_clipped.tif country: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00//wind10m_countryfile_all_clipped.tif outxml file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00/wind_popDensValues_all.xml popfile: LandScan popCellSize= 0.00833333333333 projection= GEOGCS["WGS 84",DATUM["WGS_1984",SPHEROID["WGS 84",6378137,298.257223563,AUTHORITY["EPSG","7030"]],AUTHORITY["EPSG","6326"]],PRIMEM["Greenwich",0],UNIT["degree",0.0174532925199433],AUTHORITY["EPSG","4326"]] >> 1. resample the tif file to the resolution and proj of pop density 0.00833333333333 deg >> 2. read the charactristics of the input file >> 3a. extract a piece of pop. file corresponding to the required bounding box split,rastershift False -1 99.34 4.95000000001 120.04 22.3 holland /usr/bin/gdalwarp -te 99.34 4.95000000001 120.04 22.3 "/mnt/output/GDACS/DATA/lspop20141.tif" "/mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00//wind10m_popfile_all_clipped.tif" >> 3b. extract a piece of countries corresponding to the required bounding box and resolution/proj of pop density gdalwarp -r near -tr 0.00833333333333 0.00833333333333 -te 99.34 4.95000000001 120.04 22.3 "/mnt/output/GDACS/DATA/countries.tif" "/mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00//wind10m_countryfile_all_clipped.tif" >> 4. classify the vmax file creating another array of values classified cellsize 0.00833333333333 cellsize 0.00833333333333 cellsize 0.00833333333333 >> 5. count the popolation in each cell and assign to the class and write to output >> 6. print / save output in /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00/wind_popDensValues_all.xml >> 7. remove files done Creating output file that is 2484P x 2082L. Processing input file /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/final/wind_final.tif. Using internal nodata values (e.g. -999) for image /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/final/wind_final.tif. Copying nodata values from source /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/final/wind_final.tif to destination /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/final//wind10m_res_final.tif. 0...10...20...30...40...50...60...70...80...90...100 - done. Creating output file that is 2484P x 2082L. Processing input file /mnt/output/GDACS/DATA/lspop20141.tif. Using internal nodata values (e.g. -2.14748e+09) for image /mnt/output/GDACS/DATA/lspop20141.tif. Copying nodata values from source /mnt/output/GDACS/DATA/lspop20141.tif to destination /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/final//wind10m_popfile_final_clipped.tif. 0...10...20...30...40...50...60...70...80...90...100 - done. Creating output file that is 2484P x 2082L. Processing input file /mnt/output/GDACS/DATA/countries.tif. Using internal nodata values (e.g. -32768) for image /mnt/output/GDACS/DATA/countries.tif. Copying nodata values from source /mnt/output/GDACS/DATA/countries.tif to destination /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/final//wind10m_countryfile_final_clipped.tif. 0...10...20...30...40...50...60...70...80...90...100 - done. t0 completed ============================================ 4. Copy files ============================================ copy: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18/wind_popDensValues_stept0.xml in: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191029.18/wind_popDensValues_t0.xml copy: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191029.18/wind_popDensValues_all.xml in: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191029.18/wind_popDensValues.xml copy: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191029.18/20191029.18_wind.jpg in: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191029.18/wind.jpg >> !!!! Check Copy !!!! , listfiles_copy , /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191029.18/wind_popDensValues_t0.xml , /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191029.18/wind_popDensValues.xml , /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191029.18/wind_popDensValues.xml , listfiles_all , /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191029.18/wind_popDensValues_t0.xml , /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191029.18/wind_popDensValues.xml , /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191029.18/wind_popDensValues.xml all files copied copycheck: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191029.18/20191029.18_copy_completed_wind.txt copy: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00/wind_popDensValues_stept0.xml in: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191030.00/wind_popDensValues_t0.xml copy: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/20191030.00/wind_popDensValues_all.xml in: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191030.00/wind_popDensValues.xml copy: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/20191030.00/20191030.00_wind.jpg in: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191030.00/wind.jpg >> !!!! Check Copy !!!! , listfiles_copy , /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191030.00/wind_popDensValues_t0.xml , /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191030.00/wind_popDensValues.xml , /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191030.00/wind_popDensValues.xml , listfiles_all , /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191030.00/wind_popDensValues_t0.xml , /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191030.00/wind_popDensValues.xml , /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191030.00/wind_popDensValues.xml all files copied copycheck: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/20191030.00/20191030.00_copy_completed_wind.txt >> 3.2. Classify final folder /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/final/20191030.00_final_completed_wind.txt input var: wind10m Input File: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/final/wind_final.tif hurName: hdate: var: wind10m description: wind10m: _ (holland) OutDir: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/final// PopFile: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/final//wind10m_popfile_final_clipped.tif country: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/final//wind10m_countryfile_final_clipped.tif outxml file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/final/wind_popDensValues_final.xml popfile: LandScan popCellSize= 0.00833333333333 projection= GEOGCS["WGS 84",DATUM["WGS_1984",SPHEROID["WGS 84",6378137,298.257223563,AUTHORITY["EPSG","7030"]],AUTHORITY["EPSG","6326"]],PRIMEM["Greenwich",0],UNIT["degree",0.0174532925199433],AUTHORITY["EPSG","4326"]] >> 1. resample the tif file to the resolution and proj of pop density 0.00833333333333 deg >> 2. read the charactristics of the input file >> 3a. extract a piece of pop. file corresponding to the required bounding box split,rastershift False -1 99.34 4.95000000001 120.04 22.3 holland /usr/bin/gdalwarp -te 99.34 4.95000000001 120.04 22.3 "/mnt/output/GDACS/DATA/lspop20141.tif" "/mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/final//wind10m_popfile_final_clipped.tif" >> 3b. extract a piece of countries corresponding to the required bounding box and resolution/proj of pop density gdalwarp -r near -tr 0.00833333333333 0.00833333333333 -te 99.34 4.95000000001 120.04 22.3 "/mnt/output/GDACS/DATA/countries.tif" "/mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/final//wind10m_countryfile_final_clipped.tif" >> 4. classify the vmax file creating another array of values classified cellsize 0.00833333333333 cellsize 0.00833333333333 cellsize 0.00833333333333 >> 5. count the popolation in each cell and assign to the class and write to output >> 6. print / save output in /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/final/wind_popDensValues_final.xml >> 7. remove files done copy: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/class/final/wind_popDensValues_final.xml in: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/final/wind_popDensValues.xml copy: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/tif/final/wind_FINAL.jpg in: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/delft3d/final/wind.jpg ******************************************************* * Case Completed * ******************************************************* Case starterd at: 2019-10-30 08:45:07.066203 UTC Case completed at: 2019-10-30 08:47:21.423972 UTC **********E N D O F J O B*********************** ******************************************************* * Storm Surge Calculation System (SSCS) * ******************************************************* Now is : 2019-10-30 08:55:12.858480 UTC inp1= 20191029.18 ncores= 5 var= wind lw= aa.txt stormname!!!!!!!!!!!!!!!= 1000624/JTWC dtBullHolland= 6 submitting calc 2019-10-29 18:00:00 2019-10-30 00:00:00 delft3d 99.34 120.0 5.0 22.3 4.0 holland 72 15 True GDACS/1000624/1_holland 6 1 False False 5 aa.txt 20191029.18 1000624/JTWC 6 wind False *************---------------------****************** stormname 1000624/JTWC ndt: 2 it: 0 ndt: 2 idate: 2019-10-29 18:00:00 running case from 2019-10-29 18:00:00 for 6 h start= 1 var wind step *********** **** gometeo: 6 listWindows rundate:20191029.18 RUNNING 2019-10-29 18:00:00 for 6 hours Nothing to do, case already completed ALL ************** 2019-10-29 18:00:00 ret= -3 newcase= False forceFinal= False forceBulletin= False netcdf already created it: 1 ndt: 2 idate: 2019-10-30 00:00:00 running case from 2019-10-30 00:00:00 for 72 h start= 0 var wind step *********** **** gometeo: 72 listWindows rundate:20191030.00 RUNNING 2019-10-30 00:00:00 for 72 hours Nothing to do, case already completed ALL ************** 2019-10-30 00:00:00 with createncHoll **** gometeo: 72 listWindows rundate:20191030.00 RUNNING 2019-10-30 00:00:00 for 72 hours Nothing to do, case already completed /mnt/output/SSCS/2019/GDACS/1000624/1_holland/ 2019-10-29 18:00:00 2019-10-30 00:00:00 6 currdate,prevdate 2019-10-30 00:00:00 2019-10-29 18:00:00 np.shape(alldate) 2 np.shape(alldate)*dtbull 12 output netCDF file: /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc ...file netcdf already exists : /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc /mnt/output/SSCS/2019/GDACS/1000624/1_holland/netcdf/20191030.00_all.nc.opening remove previous nc with createncHoll 0 ret= -3 newcase= False forceFinal= False forceBulletin= False netcdf already created home dir /mnt/output/SSCS/2019/GDACS/1000624/1_holland/ ret -3 classifications ============================================ 1. Set INPUT/OUTPUT ============================================ startdate 2019-10-29 18:00:00 currdate 2019-10-30 00:00:00 ndt: 6 delta: 6 nt1=delta 6 nt 72 alldate: DatetimeIndex(['2019-10-29 18:00:00', '2019-10-30 00:00:00'], dtype='datetime64[ns]', freq='6H') ============================================ 2. Processing meteo files: nc2tif ============================================ >> 2.1. Process curr + past files lon0,lon1,lat0,lat1 99.34 120.0 5.0 22.3 processing curr bull... 2019-10-30 00:00:00 ********** no new data check copy copy ok copy ok no new data ==============================================================